發電機廢氣大的主要原因是活塞環或缸套磨損，導致活塞與缸套之間的密封不嚴，從而使得大量壓縮氣體在壓縮和膨脹過程中通過這些間隙進入曲軸箱，造成曲軸箱廢氣壓力升高，進而使得尾氣排放量增多。此外，其他可能的原因包括：

　　The main reason for the high exhaust gas of the generator is the wear of the piston ring or cylinder liner, which leads to poor sealing between the piston and cylinder liner, causing a large amount of compressed gas to enter the crankcase through these gaps during compression and expansion, resulting in an increase in exhaust gas pressure in the crankcase and an increase in exhaust emissions. In addition, other possible reasons include:

　　進氣系統不暢，如節氣門堵塞；

　　The intake system is not smooth, such as a clogged throttle valve;

　　發動機散熱不良；

　　Poor engine heat dissipation;

　　機油粘度低，導致潤滑不良；

　　Low oil viscosity leads to poor lubrication;

　　發動機積碳過多；

　　Excessive carbon buildup in the engine;

　　三元催化失效或氧傳感器失效，影響尾氣排放。

　　Failure of three-way catalytic converter or oxygen sensor affects exhaust emissions.

　　解決這些問題通常需要專業的檢查和維修服務。如果您遇到發電機廢氣大的情況，建議您聯系專業的維修人員進行檢查和修理

　　Resolving these issues typically requires professional inspection and repair services. If you encounter a situation where the generator emits a large amount of exhaust gas, it is recommended that you contact professional maintenance personnel for inspection and repair

　　本文由工業尾氣發電機組提供幫助，更多的相關內容請點擊：http://inyanfang.cn希望本文能夠?yàn)槟鷰韼椭?，感謝您的閱讀！

　　This article is assisted by an industrial exhaust gas generator set. For more related content, please click: http://inyanfang.cn I hope this article can be helpful to you. Thank you for reading!